Tensile Testing Machine | Electronic Tensile Testing Machine | 180 Degree Peeling Strength Testing Machine
( Large tabletop tensile testing machine can be customized, refer to the picture above)
1. Main Function
XM-DZ02 Electronic Tensile Testing Machine/ 180 Degree Peeling Strength Testing Machine is suitable for testing the stretching, compressing, bending, shearing and peeling(90 degree and 180 degree) of various materials, such as textiles, rubber, plastic, synthetic leather, tape, adhesive products, plastic film, composite materials, electronics, metal and so on. Through our machines, you can have a comprehensive judgment on the quality of your products.
This machine is a simple tensile testing machine with simple structure and convenient operation. It can be placed on the workbench for testing. The electronic control system controls the speed control motor to rotate, and then drives the T-screw to drive the load sensor to rise and fall after the speed reduction mechanical deceleration to complete the tensile or compression test of the sample. The force value is output by the sensor, feedback is on the LCD screen, and the test displacement is displayed in real time.
It can store 10 test reference point results, automatically calculate its average value, automatically grab the maximum value, and the force value at break.
The machine includes a thermal printer that automatically outputs test results. (optional)
The machine has simple and convenient operation, and is especially suitable for testing instruments for controlling the quality of products on the production line. This series of models is mainly suitable for testing non-metallic and metallic materials with a test load of less than 2000N.
2. Technical Parameters
Electronic Tensile Testing Machine | 180 Degree Peeling Strength Testing Machine
Electronic Tensile Testing Machine/
180 Degree Peeling Strength Testing Machine
2, 5, 10, 20, 50, 100, 200kg, maximum 200kg
LCD display in English, thin film touch button (display force value and displacement parameter)
Data Sampling Frequency:
±0.5% or better
Test Force Resolution:
The maximum load of 250,000 yards；Inside and outside, regardless of file，and the full resolution unchanged
Basic configuration: pull and pressure sensor (maximum load)
Effective Test Width:
0.5～300mm/min, Stepless speed regulation and 5 fixed speeds (special test speed can also be customized according to customer requirements)
Within ± 0.5% of indicated value
Ratio of Breakpoint:
From 0~99%, which the user can set according to different materials to stop the machine.
Test Sets Safety Device:
Upper and lower stroke limiting device
Overload 10％,automatic protection
A set of tensile fixture
About 60 KG
Partner MORE +