Product Details

1. Main Function

This machine is suitable to simulate the storage state of the battery at low pressure in a short time, can automatically control the test period, monitor the pressure change in the tank throughout the whole process, and can automatically terminate the test.

2. Technical parameter

 Test chamber specification

(1) Internal specification: 300mm × 300mm × 300mm (W × H × D);

(2) The outer dimensions: subject to the real thing;

(3) The structure is upper/lower type: upper is product room and lower is electric control panel, vacuum pump built-in;

(4) The control system is located below the machine;

(5) The door has a glass window 100*100mm;

(6) The internal material is: 304# stainless steel sand board

(7) The outer material is cold plate, thickness 1.5mm, powder paint treatment

(8) The sealing material is high temperature resistant silica gel;

(9) The two sides of the box are transparent, and the other surfaces have good thermal conductivity. One side can be opened and closed, and can be placed in the incubator. The size of the box is 300*300*300mm.

(10) The thermostat box is provided by the customer.

(11) When the pressure inside the box rises sharply, it can be set to stop automatically.

Time system

(1) Timer setting, 1 second -99 hours (can choose to set hours, minutes, seconds)

(2) After the vacuum test time is completed, the automatic pressure relief will be alarmed at the same time.

Seal and vacuum display

(1) This machine adopts high sealing silicone sealing strip to ensure the sealing of the whole machine;

(2) At the same time, the pointer vacuum table is used to display the instantaneous vacuum in the box, so that you can instantly know the vacuum state inside the box.

(3) Vacuum range: 0 to -0.1Mpa, digital display pressure gauge; (vacuum degree ≤ 133Pa) pressure fluctuation <2Kpa, pressure accuracy 0.1Kpa, accuracy 1Kpa

(4) Control mode: manual start, stop, pressure relief;

(5) Two-stage rotary vane type, 4 liter direct-connected vacuum pump, power 550W/220V.

Machine power

(1) Voltage: 220V

(2) Current: 4A

(3) Power: 1KW